-
Wood Stove Heat-Recovery System
This in-process project is to create a flue-gas to hot water waste heat recovery system for our wood…
-
Vex Robotics Custom Turned Leadscrews
Custom turned leadscrews for the Vex Robotics Competition, used to actuate a linear gripper.
-
Twisted-Pair Winding Machine V2
This in-progress project is an upgrade of the previous twisted-pair winding machine designed to wind cable for use…
-
Twisted-Pair Cable Winding Machine
This machine continuously winds and cuts twisted pair for use in high-voltage (20kV breakdown) Oscilloscope isolation transformers. Cut…
-
Twisted Pair Cable Winding Machine V2.2
This project is an upgrade and redesign of the previous twisted-pair winding machine designed to wind cable for…
-
Three Wheeled Vehicle Design Project
This project was undertaken in a team of four for Mecheng 236: Design and Manufacture 2, and received a grade of A+. The goal of this project was to produce a preliminary design for a tilting three-wheeled LE-1 class vehicle, creating engineering drawings and a BOM for manufacture, and presenting the design to stakeholders.
-
Thermal Analysis of an Air-Cooled NEMA23 Stepper Motor
Edit 07/09/2024: The values calculated in this post seem a little suspect. If anyone with thermo experience can…
-
Simple Plywood Motorcycle Shed Design
This post covers the design of a simple 2×2.4m outdoor shed, made from 45x45mm lumber and 9mm plywood….
-
Scooter Battery Bracket
Set of 3D printed brackets designed to allow reused Lime Escooter batteries to be attached to the 50mm stem of a foldable scooter.
-
Punch Press Design
Basic design of a punch press using commonly available steel SHS members.
-
PrintNC Derivative CNC Router/Gantry Mill
During the summer of 2023, I had the opportunity to work at a specialized CNC machining firm, where…
-
Parametric Maypole Braider
This in-progress project is to create a working Maypole Braider to over-braid cables for EMF shielding and other…