Simple Plywood Motorcycle Shed Design
This post covers the design of a simple 2×2.4m outdoor shed, made from 45x45mm lumber and 9mm plywood....
Honda NBC110 Component Material Analysis
This post covers a simple analysis of the major component weights and raw materials of a 2016 Honda...
PrintNC Derivative CNC Router/Gantry Mill
During the summer of 2023, I had the opportunity to work at a specialized CNC machining firm, where...
Twisted Pair Cable Winding Machine V2.2
This project is an upgrade and redesign of the previous twisted-pair winding machine designed to wind cable for...
3D Printer Pen Plotting Workflow
This quick project was to adapt my Sidewinder X1 3D Printer for pen plotting, allowing me to directly...
Sidewinder X1 Extruder Stepper Upgrade
Recently I purchased a second hand Artillery Sidewinder X1 3D Printer with extruder problems. The stepper would frequently...
NBC110 Camchain and Piston Replacement
Since I’ve had my Cub, the engine has always had a pretty noticeable rattle when cold, which would...
NBC 110 Fork Oil and Gators
Today’s mission was to replace my old torn fork gators with some new ones, and change the fork...
Vex Robotics Custom Turned Leadscrews
Custom turned leadscrews for the Vex Robotics Competition, used to actuate a linear gripper.
Three Wheeled Vehicle Design Project
This project was undertaken in a team of four for Mecheng 236: Design and Manufacture 2, and received a grade of A+.
The goal of this project was to produce a preliminary design for a tilting three-wheeled LE-1 class vehicle, creating engineering drawings and a BOM for manufacture, and presenting the design to stakeholders.
Centrifugal Clutch and Sump Helicoil Installation on a Honda NBC110 Supercub.
Earlier this year I made the decision to replace the centrifugal clutch on my NBC110. This was probably...
FEA Structural Bracket
This project was undertaken in a team of two for Mecheng 334: Design and Manufacture 3, and received a...
Marble Machine Mechanism
This project was undertaken in a team of two as part of Mecheng 334: Design and Manufacture 3,...
Wood Stove Heat-Recovery System
This in-process project is to create a flue-gas to hot water waste heat recovery system for our wood...
Custom Aluminium Topbox
This project involves the design and fabrication of a topbox for a Honda NBC110. Autodesk Inventor was used...
Twisted-Pair Winding Machine V2
This in-progress project is an upgrade of the previous twisted-pair winding machine designed to wind cable for use...
Twisted-Pair Cable Winding Machine
This machine continuously winds and cuts twisted pair for use in high-voltage (20kV breakdown) Oscilloscope isolation transformers. Cut...
Parametric Maypole Braider
This in-progress project is to create a working Maypole Braider to over-braid cables for EMF shielding and other...